C1 Overhead Conveyors

Single Tongue Switch  complete with 60° Bend .A02/.A03

Tongue Switch without Bend  .A04/.A05

Automatic Single Tongue Switch Type A  complete with Bend  .A06/.A07

In automatic swivel switch type A the trolleys come from the opposite direction to that indicated by the
tongue. Possible directions : B to A and C to A.

Automatic Single Tongue Switch Type B  complete with Bend .A08/.A09

In automatic swivel switch type B the switch tongue is continuously pressed by a spring. This spring is
positioned at the switch according to the required direction of product flow. Possible directions B to A,
C to A or A to B.

Automatic Single Tongue Switch Type C  complete with Bend  .A10/.A11

In automatic swivel switch type C the switch tongue leads the trolleys in different directions. When a
trolley passes through the tongue automatically switches to the other direction. Possible directions: B to C
and then A to C (or the oppossite combination)

Automatic Single Tongue Switch Type C   without Bend .A12/.A13

Triple Tongue Switch with two 90° Bends  .A15

Triple Tongue Switch with Pneumatic Turntable  .A17

Triple Swivel Switch  .A35

Trolley Input/Output Device  .A36/.A37

Single Swivel Switch  .A38/.A39

Cruciform Turn Table Switch  .A41

Multiple Turn Table Switch  .A42

Multiple Turn Table Switch  .A43

Turntable switches are robust constructions rotating on ball bearings, which are controlled by a chain
operated system. The trolley enters the switch when it's locked in one of the positions of passage. These
switches incorporate a safe construction that precludes the derailment of trolleys.

Pneumatic Turn Table Switch  (incl. cylinder) .A44/.A44S

Single Tongue Switch  complete with 90° Bend .A45/.A46

Single Tongue Switch complete with two Bends.A47

Switch Double Pulling Chain  DL.

Used in conveyor systems at a distance of 2.5m or greater from the ground and where the installation of a
switch lever may create problems.

Cruciform Turn Table Switch   with electric operation  EL./.A41      

Turn table switches can be powered using motors or pneumatic cylinders.

Tongue Switch Pneumatic Operation  (incl. cylinder) without Pneumatic Control  PN.

Cruciform Turn Table Switch  with pneumatic operation  PN./.A41

Switch Lever  SL.

Used to the change of direction of the track and in conveyor systems which are installed at a distance
smaller than 2.5m from the ground.

 Tongue Switch Pneumatic Control  (manual valve & 10m tube)   X7./ X8.

Pneumatic control can be placed to every switch.