Niko C3 C-Rail Festoon Systems

Niko C-rail festoon systems are the ideal solution for carrying cables or hoses to feed power to overhead cranes or other moving machinery.

Advantages:

• Simple to install
• Cost effective alternative to bus bar
• More robust than catenary taut wire cable festoon system
• Free running in operation
• High safety factor
• Low maintenance
• The Niko range comprises of 5 track systems to suit varying weights and quantities of cable or hose:

* Based on 0.1-1 m/sec travel speed

C-Rail Power Supply System

C-rail Power supply systems are used to feed power cables or hoses to overhead cranes and other moving machinery.

A standard kit comprises of:

• Track (supplied in 3m or 6m lengths)
• Track joints (where necessary)
• Track supports (every 1.5m)
• 1 x End clamp
• Cable trolleys (every 1.5m to give a cable loop depth of 0.75m)
• 1 x Towing trolley
• 1 x End stop
• Cable or hose
• 2 x Glands

C-rail Pendant System

C-rail pendant supply systems are used to feed control cables or hoses to overhead cranes and other moving machinery.

A standard kit comprises of:

• Track (supplied in 3m or 6m lengths)
• Track joints (where necessary)
• Track supports (every 1.5m)
• 1 x End clamp
• Cable trolleys (every 1.5m to give a cable loop depth of 0.75m)
• 1 x Pendant trolley (supporting a terminal box or plug and socket connection)
• 1 x End stop
• Cable or hose
• 2 x Glands

C-rail Power & Pendant System

C-rail power and pendant supply systems are used to feed both power and control cables or hoses to overhead cranes and other moving machinery.

A standard kit comprises of:

• 2 runs of track (supplied in 3m or 6m lengths)
• Track joints (where necessary)
• Track supports (every 1.5m)
• 1 x End clamp
• Cable trolleys (every 1.5m to give a cable loop depth of 0.75m)
• 1 x Pendant trolley (supporting a terminal box or plug and socket connection)
• 1 x Towing trolley
• 2 x End stop
• Cable or hose
• Glands