C1 Overhead Conveyors

Support Bracket  .B00/.B50

This bracket can be used and adapted for specific applications where standard supports are unsuitable.

Wall Support Bracket  .B01

This kind of support is used for mounting the track directly on to a wall and other constructions with mounting
bolts.

Ceiling Support Bracket  .B02

This bracket is designed for bolting direct to overhead steelwork or ceiling.

Split Support Bracket  .B03

This bracket is generally used for variable height configurations.

Adjustable Bracket .B04

This allows us to adjust the height of the rails and to correct any misalignments.

Adjustable Wall Bracket  .B05

This is used in combination with the .B04 adjustable bracket and isusually mounted on the wall.

Double Adjustable Wall Bracket  .B06

Canan accommodate 2 .B04 adjustable brackets.

Split Suspension Bracket  .B08/.B10/.B12/.B14/.B16/.B20/.B22/.B24/.B26

This bracket is used for mounting directly to the underside flange of a parallel I beam.

Height Adjustable Support Joint  .B11

This is a combination of a height adjustable bracket and a splice joint.

Ceiling Support Joint  .B30

This is a combination of a ceiling support and a splice joint.

Adjustable Joist Clamp  .B35

(Parallel to the I-beam)

Adjustable Joist Clamp  .B36

(Vertical to the I-beam)

Adjustable Suspension Bracket  .B37

This item is used for clamping the adjustable suspension bracket to the support steelwork and is supplied with
bolt and square nut.

Adjustable Suspension Bracket  .B38

These brackets are designed to accommodate variations in support steelwork distances relative to the
track level. They are normally used in conjunction with the split support brackets.

Adjustable Suspension Bracket  .B39

This item is used for clamping the adjustable suspension bracket to the support steelwork and is supplied
with bolt and square nut.

Split Suspension Bracket  .B40

This is normally connected with a steel plate to the bracket B03.

Adjustable Bracket with Ceiling Support  .B44

Splice Joint  .B49

The track sections are joined using the track joint by tightening the top screws first, then aligning the profiles by
means of the side screws.

Height Adjustable  Support Assembly  .B55/.B56

Adjustable Joist Clamp Joint  .B71

(Parallel to the I-beam)

Adjustable Joist Clamp Joint  .B72

(Vertical to the I-beam)

Scaffolding Splice Joint  .B80 (previously called .B49-SCF)

Scaffolding Support Bracket  .B81 (previously called .B50-SCF)

Articulation Joint  .H08

Placed at the end of the track and used for the lifting or lowering of loads. This function may be hand-
operated or assisted by an electric hoist.

Ring Support Bracket  .H09

Used in combination with the articulation joint and connected directly to the electric hoist or any other
manually operated load-lifting system.

Dilation Joint  .H30